{"product_id":"profender-pre-assembled-gas-front-lift-to-suit-isuzu-d-max-2012-2020","title":"Profender Pre-Assembled Gas Front Lift to suit Isuzu D-Max 2012-2020","description":"\u003ch5\u003eDETAILS\u003c\/h5\u003e\r\n\u003cp\u003eProfender Pre-Assembled Gas Front Lift to suit Isuzu D-Max 2012-2020\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003eWe strongly recommend you run an adjustable coil over when opting for a 75mm front lift. This allows you to dial in the ride height while also accommodating varying loads (future proofs your lift if you want to add a bullbar and\/or winch in future), and gives you the ability to make any adjustments as necessary come certification time.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003eNote: You must use a ball joint spacer or UCA with this kit to achieve more than 45mm of lift. Please see Ball Joint Spacers\u003c\/strong\u003e\u003cstrong\u003e \u003ca style=\"color: #ff2a00;\" href=\"https:\/\/trundlesautomotive.co.nz\/products\/holden-colorado-dmax-ball-joint-spacer\"\u003ehere.\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eLooking for a quick and easy lift for your D-Max? We have the answer!\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eSimply unbolt your factory struts and replace with these direct bolt-in front pre-assembled adjustable shocks.\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003ePlease use the drop down menu to select your lift amount and the correct spring rates depending on your vehicles accessories.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eType: \u003c\/strong\u003eD-Max\u003cbr\u003e\u003cstrong\u003eModel: \u003c\/strong\u003eTFS85\u003cbr\u003e\u003cstrong\u003eYear: \u003c\/strong\u003e05\/2012 - Mid 2020\u003cbr\u003e\u003cstrong\u003eSuspension Type: \u003c\/strong\u003eCoil Spring Front \/ Leaf Spring Rear\u003cbr\u003e\u003cstrong\u003eFront Lift: \u003c\/strong\u003e20mm - 75mm Lift\u003cbr\u003e\u003cstrong\u003eDetail: \u003cbr\u003e\u003c\/strong\u003e- Twin Tube Shock Absorbers\u003cbr\u003e- These front struts are pre-assembled in our workshop and ready to go.\u003c\/p\u003e\r\n\u003ch5\u003eCOMPONENTS\u003c\/h5\u003e\r\n\u003cp\u003e2x Profender Heavy Duty Shocks - \u003cstrong\u003ePF-9610A50\u003c\/strong\u003e\u003cbr\u003e1x Pair Dobinsons Front Coil Springs\u003cbr\u003e4x Spring Seat Spacers - see below \"Included Spring Seat Spacers\" section for more details \u003cbr\u003e2x Removable Spring Seats\u003cbr\u003e2x Trundles Strut Top Mounts - \u003cstrong\u003eTOP10\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003ch5\u003e\u003cstrong\u003eIncluded Spring Seat Spacers\u003c\/strong\u003e\u003c\/h5\u003e\r\n\u003cp\u003eProfender front shocks for IFS vehicles are supplied with spring seat spacers (collars). These collars fit beneath the spring seat and can be used to increase spring preload and vehicle ride height if additional lift is required in the future.\u003cbr\u003e \u003cbr\u003eWhen you order a pre-assembled strut from us, you do not need to install these collars before fitting the strut. Your struts are assembled to your requested ride height and load rating using a correctly specified coil spring.\u003cbr\u003e \u003cbr\u003eIf you are ordering shocks only to use with an existing lifted coil spring, you also do not need to install the collars, provided your current springs are correctly specified.\u003cbr\u003e \u003cbr\u003eInstalling these collars will increase the ride height of your supplied strut. As a guide, the 10 mm collar will typically provide approximately 15 mm of additional vehicle lift, although actual lift will vary depending on vehicle weight, accessories, and spring rate.\u003cbr\u003e \u003cbr\u003eThe collars are supplied separately and are not required for standard installation.\u003cbr\u003e \u003cbr\u003eNew Zealand Compliance Notice: If these collars are fitted to alter the spring seat height and increase ride height, LVV certification will be required before the vehicle can be legally used on the road. Customers should consult an LVV certifier before installation.\u003cbr\u003e \u003cbr\u003eShocks installed without the spring seat spacers are generally treated as direct replacement suspension components and typically do not require LVV certification.\u003c\/p\u003e","brand":"KITHEADER","offers":[{"title":"20mm Lift \/ No Load","offer_id":54329788170553,"sku":"DM-134P-1","price":899.0,"currency_code":"NZD","in_stock":true},{"title":"40mm Lift \/ 0-60Kg","offer_id":54329788203321,"sku":"DM-296P-1","price":899.0,"currency_code":"NZD","in_stock":true},{"title":"40mm Lift \/ 70-100Kg","offer_id":54329788236089,"sku":"DM-300P-1","price":899.0,"currency_code":"NZD","in_stock":true},{"title":"75mm Lift \/ 0-50Kg","offer_id":54329788268857,"sku":"DM-302P","price":899.0,"currency_code":"NZD","in_stock":true},{"title":"75mm Lift \/ 60-120Kg","offer_id":54329788301625,"sku":"DM-314P","price":899.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0803\/8504\/8889\/files\/PF-9602A50_Pre-Assembled_v001_WATERMARKED_e55827bb-42fc-4cc8-9d34-8803e7438a46.jpg?v=1786752850","url":"https:\/\/www.profabricationandmechanical.co.nz\/products\/profender-pre-assembled-gas-front-lift-to-suit-isuzu-d-max-2012-2020","provider":"Pro Fabrication \u0026 Mechanical","version":"1.0","type":"link"}